Remote Control Via Bosch Levelling Remote App; Sleep Mode; Locking The Keyboard - Bosch GRL 600 CHV Notice Originale

42 | English
It will be confirmed on the display
whether a connection has successfully
been established to the remote con-
trol or the laser receiver.
If the attempt to establish a connec-
tion to the remote control is success-
ful, the status indicators (33) and
(34) on the remote control will light
up green for 3 s.
If no connection could be established,
an error message will appear on the
display.
If the attempt to establish a connec-
tion to the remote control is not successful, status
indicators (33) and (34) on the remote control will light up
red for 3 s.
Two laser receivers can be connected to and work with the
measuring tool at the same time.
If other remote controls or laser receivers are connected, the
oldest connection will then be deleted.

Remote control via Bosch Levelling Remote App

The measuring tool is equipped with a Bluetooth® module
which uses radio technology to enable remote control via a
smartphone with a Bluetooth® interface.
The Bosch Levelling Remote App application (app) is re-
quired to use this function. You can download this in the app
store for your terminal device (Apple App Store, Google Play
Store).
Information about the system requirements for a Bluetooth®
connection can be found on the Bosch website at
www.bosch‑pt.com
When remote controlling via Bluetooth®, poor reception con-
ditions can cause time delays between the mobile terminal
device and the measuring tool.
The Bluetooth® function is switched on by default.
To switch off Bluetooth® to control remotely via the app,
press the Bluetooth® button (7). The Bluetooth® connection
indicator (b) will go out on the start screen.
To switch back on Bluetooth® to con-
trol remotely via the app, briefly press
the Bluetooth® button (7). The symbol
for establishing a connection to the
smartphone will appear on the dis-
play.
Ensure that the Bluetooth® interface is
activated on your mobile device.
It will be confirmed on the display
whether a connection has successfully
been established. The existing con-
nection is visible on the Bluetooth®
connection indicator (b) on the start
screen.
1 609 92A 6AE | (28.05.2021)
If no connection could be established,
an error message will appear on the
display.
The connection between mobile end device and measuring
tool is established after the Bosch application has started. If
multiple active measuring tools are found, select the appro-
priate measuring tool. A connection will be established auto-
matically if only one active measuring tool is found.
The Bluetooth® connection may be interrupted if the dis-
tance between the measuring tool and the mobile device is
too great or is blocked, and if there are any sources of elec-
tromagnetic interference. In this case, another attempt to
establish a connection will automatically begin.

Sleep mode

During breaks from work, you can set the measuring tool to
sleep mode. All your settings will still be saved.
To switch on sleep mode, briefly
press the on/off button (11). In the
menu which subsequently appears,
press the on/off button (11) as many
times as needed until sleep mode has
been selected. Confirm your selection
with by pressing the slope
button (14).
Alternatively, you can switch on sleep mode by pressing the
sleep mode button (27) on the remote control.
When sleep mode is switched on, the
sleep mode symbol will be indicated
on the display. The status
indicator (12) will slowly flash green.
The shock-warning function will re-
main activated and all settings will be
saved.
To switch off sleep mode, briefly press the on/off
button (11) on the measuring tool or press the sleep mode
button (27) on the remote control.
You can also switch off the measuring tool while it is in sleep
mode. Press and hold the on/off button (11) until the
switch-off symbol appears on the display. All other buttons
on the measuring tool and the remote control will be deactiv-
ated.
It is also possible to switch sleep mode on and off via the
Bosch Levelling Remote App.

Locking the keyboard

The keyboard of the measuring tool
and the remote control can be locked
via the Bosch Levelling Remote App.
The keyboard lock symbol will appear
on the measuring tool's display.
The keyboard can be unlocked as follows:
– via the Bosch Levelling Remote App,
Bosch Power Tools