Engagement Speed Check - Yamaha FX Nytro 2008 Manuel D'atelier

DRIVE V-BELT/

ENGAGEMENT SPEED CHECK

6. Measure:
• Drive V-belt circumference a
Out of specification → Replace.
ENGAGEMENT SPEED CHECK
1. Place the snowmobile on a level surface.
2. Inspect:
• Clutch engagement speed
Inspection steps:
• Start the engine, and open the throttle lever
gradually.
• Check the engine speed when the snowmobile
starts moving forward.
Out of specification → Adjust the primary
sheave.
2-31
INSP
ADJ
V-belt circumference:
1,129 ~ 1,137 mm (44.4 ~ 44.8 in)
Engagement speed:
FX10/FX10RT/FX10RTR/FX10RTRA
3,550 ~ 3,950 r/min
FX10MT/FX10MTR "USA/Canada"/
FX10MTRA "USA/Canada"
3,300 ~ 3,700 r/min
FX10MTR "Europe"/FX10MTRA
"Europe"
3,100 ~ 3,500 r/min