I.8 Description Of Controls; I.8.1 Mains Switch; I.8.2 Automatic Switches - RHOSS MICROSYSTEM TCAEY Série Mode D'emploi

Fig. 2
Fig. 4
Indicates the presence of moving parts (belts, fans)
(Fig. 3, 4).
Indicates the presence of hot surfaces (cooling
circuit, compressor heads) (Fig. 2).
Indicates the presence of live components(Fig. 2).
Indicates the presence of sharp edges in the area of
the finned coils (Fig. 5).
I.8 DESCRIPTION OF CONTROLS
The controls consist of the main switch, the automatic switches and the
user interface panel located on the appliance.
I.8.1 MAINS SWITCH
Manually controlled type "b" mains power supply disconnecting switch
(ref. EN 60204-1§5.3.2).
I.8.2 AUTOMATIC SWITCHES
• Automatic switch for compressor protection
This switch allows the supply or isolation of the compressor's main
power circuit.
Fig. 3
Fig. 5
26
SECTION I: USER