Disassembly - Unold 78525 Mode D'emploi

10. Place the motor block on the mix-
ing container. Align the motor
block and lid so that the arrow
points to the „

DISASSEMBLY

1. Turn the switch into the position
„0", and wait until the hooks have
completely stopped turning.
2. Then turn the switch for min. 5
seconds into the position
28
" symbol. Ensure

Copyright UNOLD AG | www.unold.de
that fastening the motor block
does not detach the bowl from the
base! To take off the motor block,
you must turn the arrow to the
„ " symbol.

Caution: Do not place your
fingers between the motor
block and the lid – danger of
injury due to pinching!
and hold the switch during this
time.
3. The hook/whisk now turns in
opposite direction in order to
release it. Please note that the
hook/whisk will only detach from
the motor block after removing
the motor block from the bowl.
4. Hold the motor block at the handle
and turn it counter-clockwise,
until it can be lifted from the
bowl (Symbol
will remain in the batter and can
be removed.
). The hook/whisk
