Roco and Fleischmann WLANmaus Z21 Mode D'emploi page 86

The scrolling text „DELETE?" appears in the next screen.
– Press "Light /OK" to confirm the deletion action again. This returns you to the "DELETE" start level,
as indicated by the
The route is now removed from the library.
4.4 "SEARCH": You can use this menu item to assign a turnout address to the corresponding
routes in the library.
Simply enter a turnout address using the "function keys", confirm with " OK- key"and the WLAN-
maus
will find all routes, from the library.
▪ With the "arrow keys" you can scroll through the routes found
▪ Press the " OK- key"confirm the entry. Die WLANmaus geht in den Fahrwege- Editiermodus und
springt direkt an die Stelle der gesuchten Weichenadresse.
If the multiMAUS
FOUND" appears in the display. You can use the "STOP" or " OK- key" to return to the start level
"SEARCH".
4.5 „SEND": (from Z21 Maitenance Tool V1.12 with Z21-Firmware-Version 1.30)
4.6 „RECEIVE": (from Z21 Maitenance Tool V1.12 with Z21-Firmware-Version 1.30)
You require both of these menu items when you wish to transfer the locomotive library from one
WLANmaus to another WLANmaus (or several WLANmaus devices). To do so, you set the transmitting
WLANmaus to "SEND" and the other WLANmaus or WLANmaus devices to "RECEIVE." The receiver
units must be activated first.
You start the transmission by pressing the " OK- key on the transmitting WLANmaus. When the
transfer is complete, the receiver WLANmaus is in library mode, the transmitting WLANmaus is at the
start level "SEND".
4.7 „MODE": Here you can set the WLANmaus either to "ROUTES" or "TURNOUT" mode (con-
firm with " OK-key".), i.e. if you press the "
4.8 „PAUSE TIME": Since under certain circumstances there may be bottlenecks in the track
power supply when switching tracks with more than 5 turnouts, e.g. when using the slow-running
RocoLine turnout drives, this option allows you to define a pause time between the switching of turn-
outs along a track.
You can set the desired duration in milliseconds using the arrow keys.
Value range: 100 – 1000, default setting: 100
▪ Confirm with the OK-key. You will then be returned to the initial "PAUSE TIME" level.
86
86
8010813920_II_2022.indd 86 8010813920_II_2022.indd 86
at the bottom of the display.
does not find the corresponding turnout address, "TURNOUT ADRESSE NOT
PRO
" key, the respectively selected mode opens.
09.02.2022 09:17:38 09.02.2022 09:17:38