Rear Panel - Sony DSR-20MD Mode D'emploi

Location and Function of Parts

Rear Panel

INPUT OUTPUT
S VIDEO
VIDEO
CH-1 CH-1/3
AUDIO CH-2 CH-2/4
2 OUTPUT
1 INPUT
1 INPUT connectors
Input video and audio signals. To connect a VCR
equipped with the S-video output jack, use the
S VIDEO jack on this VCR.
2 OUTPUT connectors
Output video and audio signals. To connect a VCR
equipped with the S-video input jack, use the S
VIDEO jack on this VCR.
3 MONITOR connectors
Output video and audio signals for monitoring.
10 GB
Chapter 1 Overview
MONITOR
REMOTE LANC
FOOT
CONTROL S
SWITCH
SYNC
INT
EXT
CH-1/3
DC IN
CH-2/4
4 SYNC switch
3 MONITOR connectors
connectors
connectors
5 REMOTE
6 REMOTE
7 LANC
DV RS-232C
8 RS-232C
IN/OUT
9 DV
AC IN
0 ~ AC IN connector
qa
qs Equipotential ground terminal
4 SYNC switch
Selects the reference signal. The video signal is locked
to V-sync or H-sync, but not locked to sub-career. The
sync phase is not adjusted. The video signal is not
locked to DV input.
INT: Selects the playback signal on this VCR as the
reference signal.
EXT: Selects the input video signal from the external
equipment connected to this VCR as the reference
signal.
Notes
• The picture and the sound may be distorted if:
– You set the SYNC switch during playback.
– The analog signal is input from the INPUT
connectors during playback with the SYNC switch
set to EXT.
• If the SYNC switch is set to EXT during playback,
the INPUT SELECT button does not work.
CONTROL S jack
FOOT SWITCH jack
jack
connector
jack
DC IN connector