Symbol Definitions - DePuy Mitek FMS SOLO Mode D'emploi

1.4. Symbol Definitions

Front Panel
Power pad
Turns the power ON & OFF if
the main power switch on the
back of the pump is on (the
green standby light is on).
Alarm
The red indicator will light up if
a safety parameter is violated.
Pressure cycle
Alleviates bleeding during
surgery, by increasing base
pressure for two minutes.
One-way foot pedal board
Used to activate or cancel a
pressure cycle.
Increase
Decrease
Refer to instruction manual/
booklet
Refer to instruction manual/
booklet
109076-KIM Rev B.indd 10
back Panel
On
Off
Equipotential symbol
(ground)
IP50
No protection from liquid
Type b Class 1
Conforms to standard
EN 60601-1.
Caution
See instructions for use.
10
9/26/12 4:02 PM