DePuy Mitek FMS SOLO Mode D'emploi page 11

8 Pressure cycle.
A lleviates bleeding by increasing base
pressure for a 2 minute cycle.
PRESSURE adjustment pads.
9
P ress the arrows to increase or decrease
the pressure in increments of 5. The
initial setting is 50.
Pump Run/Stop pad.
10
T urns the pump ON and OFF. If the
pump is activated, <PUMP> appears on
the pressure display. Green LED blinks
when pump is on stop.
11 built-in Pressure transducer
connection.
T o connect the One Day Set Irrigation
Tube and measure the pressure in the
pressure chamber.
12 Fill Chamber pad.
M anually fills the chamber and turns off
the LOW PRESSURE alarm.
13 Patented auto-locking device.
A llows the disposable tubing to be
properly positioned and locked in place
around the roller pump.
109076-KIM Rev B.indd 13
13
9/26/12 4:02 PM