Rear Panel; Other Indicators (Audible Tones) - DePuy Mitek FMS SOLO Mode D'emploi

14
I/O switch, fuses and
14
power connection.
15 Identification & specification.
16 Foot pedal connection.
9-pin connector to plug foot pedal.
17 Shaver interface connection.
2 5-pin hand and foot control interface
cables connector. Contact your DePuy
Mitek Sales Representative for Shaver
Interface Cable ordering information
due to the variety of products available.

1.6. Other Indicators (Audible Tones).

.
An audible tone sounds when the POWER pad
is pressed and the pump turns on.
.
An audible tone sounds when the PRESSURE
mode is activated (see pressure cycle section to
activate the cycle).
109076-KIM Rev B.indd 14
b – Rear Panel
15
Serial number.
18
• T he first two digits represent the year
of manufacturing.
• T he second set of digits represents
the week of manufacturing and serial
number.
19 Reference number.
.
T wo audible tones sound when the PRESSURE
mode is deactivated (see chapter 4 to
deactivate the cycle).
14
19
18
17
16
9/26/12 4:02 PM