Fault Code History - Nilfisk Advance 56511710 Mode D'emploi

FAULT CODE HISTORY

Every fault code that occurs is recorded by the machine and kept in a history log. To view the fault history follow the steps listed in the Table
below. Navigate through the menu using the four Navigation keys (K, L, N and O) as shown in Figure 23A. Press the Information switch (F) to
exit the menu.
Step # Description (See Figures 23A – 23D for steps listed below)
1 Press the Information Switch (F).
2 Scroll down to "Faults" using the Down Arrow Key (L).
3 Select "Faults" using the Right Arrow Key (O).
4 Scroll down to "Fault History".
5 Select "Fault History" to display Fault History.
6 Use the up and down arrow keys to scroll through the list of faults.
7 Select a Fault Code to view the Fault Code description.
8 When fi nished, press the Information Switch (F).to exit the menu.
NOTE (1): In Figure 23D, the number to the far right of the Fault Code (0029.1) represents the most recent Time Stamp in Drive Hours.
NOTE (2): In Figure 23D, the number in ( ) is the number of times the Fault Code has occurred. For example, "(1x)" means that the Fault Code
has appeared only once and "(2x)" means that the Fault Code has occurred twice.
FIGURE 23B
Menu
Hours
Faults
System
i Exit
4/2017
(2/3)
Select
FIGURE 23D
Fault History
1) 4-001 (1x)
A4 Drive Ctr1 Timeout
2) 2-025 (2x) 3-001 0029.1
M5 Vac 2 Open
Back
INSTRUCTIONS FOR USE
FIGURE 23A
F
K
FIGURE 23C
Faults
Active Faults
Fault History
Back
(1/9)
0029.1
Select
56091206 - CS7010
ENGLISH - A
L N O
(2/2)
3
9
Select
A - 47