Fault Code History - Nilfisk Advance SC5000 34D Mode D'emploi

FAULT CODE HISTORY

Every fault code that occurs is recorded by the machine and kept in a history log. See Figures 5-2 - 5-4. To view the fault history press the
Information Switch (B) to bring up the information menu. Use the four Navigation Arrows (B1) (up, down, left & right) to move through the menu
and the information switch to exit the menu.
Scroll down to Faults, right arrow to select.
Menu [Menu] ________________________________
Hours [Hours]
Faults [Faults]
Keys [Keys]
Options [Options] _______________________
Exit [i Exit] Select [Select]
Scroll down to Fault History, right arrow to select.
Faults [Faults] ______________________________
Active Faults [Active Faults]
Fault History [Fault History]
___________________________________________
Back [Back] Select [Select]
Each fault is displayed along with; (Nx) where "N" is the number of times
the fault has occurred, the timestamp shows the most recent occurrence
and description. Use the up and down arrows to scroll through the list of
faults.
Fault History [Fault History] __________________
Fault Code (Nx)
Fault Code Description
___________________________________________
Back [Back] Scroll [Scroll]
1/2021
Drive Hours
INSTRUCTIONS FOR USE
FIGURE 5-2
Menu
Hours
Faults
Keys
Options
i Exit Select
FIGURE 5-3
Faults
Active Faults
Fault History
Back Select
FIGURE 5-4
Fault History
1) 1-003 (3x)
K1 Contact Weld
2) 1-011 (2x)
CAN Bus 1
Back Scroll
56091219 - Advance SC5000
ENGLISH - A
B1
B
B1
0
5
(1/4)
0007.7
0090.9
A - 39