Introduction; Parts And Service; Modifications; Name Plate - Nilfisk Advance SC5000 34D Mode D'emploi

INTRODUCTION

This manual will help you get the most from your Advance Scrubber. Read it thoroughly before operating the machine.
Note: Bold numbers in parentheses indicate an item illustrated on pages 8 – 11.
This machine is intended for commercial use, for example in hotels, schools, factories, shops, offices and rental businesses. The Advance
SC5000 is a battery powered floor cleaning machine.
WARNING:
The operation of this machine is strictly reserved to trained and qualified operators.
CAUTION!
• Use extreme CAUTION when operating this machine. Be certain that you are thoroughly familiar with all operating
instructions before using this machine. If you have any questions, contact your supervisor or your local Advance Dealer.
• If the machine malfunctions, do not try to correct the problem unless your supervisor directs you to do so. Have a
qualified company mechanic or an authorized Advance Dealer service person make any necessary corrections to the
equipment.
• Use extreme care when working on this machine. Loose clothing, long hair, and jewelry can get caught in moving parts.
Turn the Power Switch OFF and remove the magnetic key before servicing the machine. Use good common sense,
practice good safety habits and pay attention to the yellow decals on this machine.
• Drive the machine slowly on inclines.
• The maximum rated incline for scrubbing is 12% (6.8°). The maximum rated incline during transport is 20% (11°).

PARTS AND SERVICE

Repairs, when required, should be performed by Nilfisk, Inc., who employs factory trained service personnel, and maintains an inventory of
Advance original replacement parts and accessories.
Call Nilfisk, Inc. for repair parts or service. Please specify the Model and Serial Number when discussing your machine.

MODIFICATIONS

Modifications and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or user
without prior written approval from Nilfisk, Inc. Unapproved modifications will void the machine warranty and make the customer liable for any
resulting accidents.

NAME PLATE

The Model Number (also known as Part Number) and Serial Number of your machine are shown on the Nameplate, located on the rear of the
steering column.
Date of Manufacture "Date Code" is marked on the nameplate. Date Code: A21, means January 2021.
This information is needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your
machine for future reference.
MODEL NO. ___________________________________________________________
SERIAL NO. ___________________________________________________________
1/2021
INSTRUCTIONS FOR USE
56091219 - Advance SC5000
ENGLISH - A
A - 3