Information Menu Display - Nilfisk Advance 56511710 Mode D'emploi

revised 10/2017

INFORMATION MENU DISPLAY

There are three "User Types" (modes) within the Menu display that allow for different functions. The three "User Types" include:
• Operator
• Supervisor
• Technician
User Type
Operator
Hours, Faults, Systems
Hours, Faults, Systems
Supervisor
Technician
Service Technician only
OPERATOR MODE
I
Menu
F
Hours
Faults
System
i Exit
J
K L N
Pressing the Information Switch (F) will display the menu (I). This allows access to change machine settings and gather machine information. The
four Navigation Arrows shown (J) identify which buttons to press to move through the menu. For example, press (K) to move up, press (L) to move
down, press (N) to move left and press (O) to move right. When fi nished, press the information switch (F) to exit the menu.
4/2017
Function
Simply turn on the machine
Press and hold the Scrub and Solution buttons then turn the key to the on position
and Options
See Service Manual
Select
J
O
INSTRUCTIONS FOR USE
To Enter the User Type mode
SUPERVISOR MODE
I
Menu
F
Hours
Faults
Options
System
i Exit Select
J
K L N
56091206 - CS7010
ENGLISH - A
J
O
A - 13