Medion LIFE P66130 Notice D'utilisation page 285

 You must then establish a network connection with the
radio in your WLAN settings. You now change to the
WLAN settings of your smartphone via the "Settings" op-
tion.
 Search for network-enabled devices in your WLAN set-
tings. The MEDION MD 44130 radio now appears in the
list. The last digits of the MAC address are shown to dis-
tinguish precisely between different devices.
 Now select the MEDION MD 44130 device and connect
to it.
You will hear an indication that the devices have been con-
nected successfully and you should continue to the follow
the app instructions.
 Go back one step from your WLAN settings to return to
the MEDION SPEAKER app.
 Select the desired WLAN network to which the radio is to
be connected, then enter the corresponding password
and continue.
A voice indicates that the WLAN network connection has
been established. The LED indicator below the display no
longer flashes. Note that the radio must be connected to the
same network as the external device.
 A green checkmark appears as soon as the connection
has been established. Continue.
To activate Amazon Alexa®, register the device in your Ama-
zon account. You need to be registered on Amazon for this:
 Log into your Amazon account.
 In the next step, select the language in which you wish
to communicate with Amazon Alexa® and confirm this.
 A checkmark signals that the registration was success-
ful. Continue.
284