Alarm Indicators And Screen Symbols; How To Mute And Unmute An Alarm; How To Scroll Through The Alarm Screens - Philips RESPIRONICS SimplyGo Mini Mode D'emploi

SimplyGo Mini User Manual
Notes:
• The alarm log is maintained between device Power Off and Power On
cycles (the time of Power Off is not logged)�
• The most recent alarm events in the log from the current Power On
session may be lost if the device experiences a total loss of power and
improperly shuts down�
• The alarm log maintains the most recent 16 alarms and will discard the
oldest data once its memory is full and a new alarm occurs� If less than 16
alarms have occurred, N/A will appear on some of the alarm screens�

Alarm Indicators and Screen Symbols

Note: All SimplyGo Mini alarms are low priority alarms� The alarm system
should be verified before use and between users by service personnel
in accordance with the SimplyGo Mini service manual�

How to Mute and Unmute an Alarm

To mute an active alarm:
• When an alarm appears on screen, press the yellow Mute control that ap-
pears on the alarm screen� The Mute control will then change to gray�
To unmute an active alarm:
• Press the gray Mute control on the alarm screen to unmute the alarm.

How to Scroll through the Alarm Screens

Use the blue arrows in the top left and right corners of the alarm screens to
scroll through the alarms�
Note: These arrows only appear when more than one alarm occurs
simultaneously�
Click on the left blue arrow to go back to the previous alarm or click on the
right blue arrow to go to the next alarm�
Note: If you are on the first alarm and there are no previous alarms, then only
the blue arrow on the right will appear on screen� If you are on the last
alarm and there are no more alarms to view, then only the blue arrow
on the left will appear on screen, allowing you to scroll back through
the previous alarms�
AMSR
24
oxygenconcentratorstore.com 1-877-774-9271