Philips RESPIRONICS SimplyGo Mini Mode D'emploi page 29

SimplyGo Mini User Manual
Visual, Audio
Indicators
1 beep
that repeats every
16 seconds
AMSR
26
Description
High Breath Rate Alarm
This alarm indicates that
the user's breath rate is
exceeding the maximum
pulse rate of the device�
The device is still working
properly and is still
providing the maximum
amount of oxygen for the
user's setting�
Press the yellow Alarm
silence button on the
screen to temporarily
silence the alarm, and
the 2nd screen shown
at left appears� Or, press
the Home button on the
device to return to the
Home screen, and the 3rd
screen will appear with
the High Breath Rate (MX)
alarm symbol in the upper
left corner to indicate the
alarm state�
Note: This alarm could
take up to 36 seconds to
activate from the time
the alarm condition is
present�
oxygenconcentratorstore.com
What To Do
The indicator
resets itself when
the breath rate is
reduced� Breathe
slower or remove
the cannula for 30
seconds to reset the
alarm�
If this indicator
regularly occurs,
contact your
equipment
provider�
1-877-774-9271