Accessory Equipment And Replacement Parts - Philips EverFlo Mode D'emploi

EverFlo / EverFlo Q User Manual
EverFlo models that are compatible with the UltraFill Oxygen Filling Station will include an additional
connection port for connection to the UltraFill Oxygen Filling Station. The performance of the EverFlo is
not affected when the port is connected to the UltraFill Oxygen Filling Station. The port is for connection to
the UltraFill Oxygen Filling Station only, not for connecting the patient oxygen cannula. The patient oxygen
cannula is connected to the EverFlo as shown later in this manual.
UltraFill Port
Note: When connected to the UltraFill Oxygen Filling Station, the EverFlo device disables its Low Flow Alarm
when a cylinder is in the process of being filled. If you are breathing from the EverFlo at this time and an
occlusion occurs in the cannula, the EverFlo will not sense the disruption of the flow of oxygen to you. If you
are breathing from the EverFlo device while filling a cylinder, ensure that you place your oxygen cannula in a
position to avoid it being kinked or crushed. Refer to the Troubleshooting Guide for more information.

Accessory Equipment and Replacement Parts

Contact your home care provider if you have questions about this equipment. Use only the following Philips
Respironics accessories and replacement parts with this device:
- Air Inlet Filter
- Humidifier Connector Tube
4