Accessory Equipment And Replacement Parts - Philips RESPIRONICS EverFlo Manuel De L'utilisateur

Masquer les pouces Voir aussi pour RESPIRONICS EverFlo:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
EverFlo / EverFlo Q User Manual
EverFlo models that are compatible with the UltraFill Oxygen Filling Station will include an additional connection
port for connection to the UltraFill Oxygen Filling Station. The performance of the EverFlo is not affected when the
port is connected to the UltraFill Oxygen Filling Station. The port is for connection to the UltraFill Oxygen Filling
Station only, not for connecting the patient oxygen cannula. The patient oxygen cannula is connected to the
EverFlo as shown later in this manual.
When the EverFlo is connected to the UltraFill Oxygen Filling Station, the maximum flow of the device that can be
delivered to the patient will be reduced from 5 LPM to 3 LPM.
Note: When connected to the UltraFill Oxygen Filling Station, the EverFlo device disables its no flow and high flow
alarms when a cylinder is in the process of being filled. If you are breathing from the EverFlo at this time and an
occlusion occurs in the cannula, the EverFlo will not sense the disruption of the flow of oxygen to you. If you are
breathing from the EverFlo device while filling a cylinder, ensure that you place your oxygen cannula in a position
to avoid it being kinked or crushed. Refer to the Troubleshooting Guide for more information.

Accessory Equipment and Replacement Parts

Contact your home care provider if you have questions about this equipment. Use only the following
Philips Respironics accessories and replacement parts with this device:
- Air Inlet Filter
- Humidifier Connector Tube
- The EverFlo device is compatible with all bottle style humidifiers supplied through Philips Respironics.
Accessories provided with the concentrator are to be specified for use at oxygen flows of 1 to 5 liters per minute
and a maximum pressure of 6.5 PSIG (44.8 kPa). In addition, cannulas must be a minimum of 2.13 meters (7 feet) in
length and a maximum of 45.7 meters (150 feet).
The organization that provides this equipment to the patient for use is accountable for ensuring the compatibility
of the accessories used to connect the patient to the oxygen concentrator to the requirements of ISO 80601-2-69. In
order to meet the requirements of ISO 80601-2-69, the accessory cannula must have a fire stop device that stops fire
and flow of oxygen to the patient.
Contact your home care provider if you have any questions concerning the use of accessories.
WARNING: The use of incompatible parts or accessories can result in degraded performance.
5

Publicité

Table des Matières
loading

Table des Matières