Basic Settings; To Access The Basic Settings - Gaggenau VI 422 611 Notice D'utilisation

Basic settings

B a s i c s e t t i n g s
T he appliance has various basic settings. These basic
settings can be altered to suit your individual
requirements.
Display Function
™‚
Signal tones
‹¯
All signal tones activated.*
‹""
Only audible fault signal activated.
™ƒ
Power management function. Limit the total power of the cooktop (watts)
‹""
Deactivated.*
‚‹‹‹ Lowest setting
‚†‹‹
ƒ‹‹‹
...
Š†‹‹ Highest setting on the cooktop
™„
Check cookware; cooking results
‹
Not suitable
‚
Not perfect
ƒ
Suitable
™...
Restore to standard settings
‹""
Individual settings.*
‹¯
Restore the factory settings.
* Factory settings

To access the basic settings:

The cooktop must be switched off.
1.
Push in one of the control knobs and turn it anti-
clockwise to the Ž position.
2.
Turn the control knob clockwise to position 1.
3.
Turn the control knob anti-clockwise to position 0.
The t symbol will be lit. The illuminated ring around
the control knob will be lit yellow.
4. Touch the t symbol.
The displays show the product information.
Product information
Customer service index (CSI)
Production number
Production number 1
Production number 2
5.
Display
6.
‹‚
"š
Š†.
ܠ
Press the t symbol again to call up the basic
settings.
In the displays, ™‚ and ‹¯ light up as a presetting.
Touch the t symbol repeatedly until the required
function is displayed.
en-us
Basic settings
25