Locking The Control Panel For Cleaning; Automatic Safety Switch-Off Function - Gaggenau VI 422 611 Notice D'utilisation

en-us
Timer functions

Locking the Control Panel for Cleaning

If you wipe over the control panel while the cooktop is
switched on, settings may be changed. To avoid doing
this, you can use the cooktop's "Lock control panel for
cleaning" function.
To switch on: Touch the − symbol. An audible signal
sounds. The indicators for the active functions will flash.
The control panel is locked for 10 minutes. You will now
be able to clean the surface of the control panel without
altering the settings.
Switching off: Within the next 10 minutes, touch the −
symbol again.
If the function does not deactivate during these
10 minutes, the cooking field switches off.
Notes
The locking function does not affect the control
▯
knobs. The cook-top can be switched off at any time.
While the locking function is active, the power supply
▯
to the cooktop is disconnected. The burners may still
be hot.
24

Automatic Safety Switch-off Function

For your protection, the appliance features a safety
switch-off function. Depending on which heat setting has
been selected, the burner's heating element will be
deactivated if no further action is performed within a set
time after selecting the heat setting.
Heat setting
‚
ƒ to ...
† to ˆ
‰
Š to ‚‹
‚‚ to ‚ƒ
Frying sensor temperature
setting
‚ to †
An audible signal will indicate when this time has
elapsed. The control knob is active and the illuminated
ring around it will flash. "‰ will be lit on the burner
display.
Turn the control knob to the 0 position. The appliance
can now be switched back on as usual.
Deactivated after
10 hours
5 hours
4 hours
3 hours
2 hours
1 hour
Deactivated after
3 hours