Protecting The Environment; Energy-Saving Advice; Cooking With Induction; Advantages Of Induction Cooking - Gaggenau VI 422 611 Notice D'utilisation

en-us
Causes of damage

Protecting the Environment

Energy-saving Advice

Place a lid on cookware. Cooking with an uncovered
▯
pan will result in a considerable increase in energy
use. Use a glass lid to provide visibility and avoid
having to lift the lid.
Use cookware equipped with a solid, flat bottom.
▯
Curved pan bases increase energy consumption.
The diameter of the pan base must match the size of
▯
the element. Note: The manufacturer normally
indicates the pan's upper diameter. This is normally
greater than the diameter of the pan's base.
Choose cookware of a size suited to the amount of
▯
food you are going to cook. A large pan that is only
half full will use a lot of energy.
Use a small amount of water when cooking. This saves
▯
energy, and vegetables retain a larger percentage of
their vitamins and minerals.
Select the lowest power level to maintain cooking. If
▯
the power level is too high, energy is wasted.
12

Cooking with Induction

Advantages of induction cooking

Induction cooking is very different from traditional
cooking methods, as heat builds up directly in the item of
cookware. This offers numerous advantages:
Saves time when boiling and frying.
▯
Saves energy.
▯
Easier to care for and clean. Spilled food does not
▯
burn on as quickly.
Heat control and safety – the cooktop increases or
▯
decreases the heat supply as soon as the user
changes the setting. The induction element stops the
heat supply as soon as the cookware is removed from
the element, without having to switch it off first.

Cookware

Only use ferromagnetic cookware for induction cooking,
such as:
Cookware made from enameled steel
▯
Cookware made from cast iron
▯
Special induction-compatible cookware made from
▯
stainless steel.
To check whether your cookware is suitable for induction
cooking, refer to the section on ~ "Suitability test of
cookware".
To achieve a good cooking result, the ferromagnetic area
on the base of the pan should match the size of the
element. If a element does not detect an item of
cookware, try placing it on another element with a smaller
diameter.
If the only element being used is the flexible cooking
zone, larger cookware that is particularly suited to this
zone can be used. You can read more information on the
positioning of the cookware here