Control Knob
You can use the control knobs to select the heat setting,
the PowerBoost feature, and the flex cooking zone.
1
Lowest heat setting
12
Highest heat setting
Ž
PowerBoost feature
ª
Flex cooking zone activated
The control knobs have an illuminated ring with an
illuminated symbol for each function. The illuminated ring
changes color when particular functions or processes
are activated.
Elements
Burner
Û
Single-circuit
Use cookware that is a suitable
burner
size
See section ~ "Flexible Cook-
á
Flex cooking
ing Zone"
zone
Only use cookware that is suitable for induction cook-
ing; see section
Getting to know your appliance
Residual Heat Indicator
The cook-top has a residual heat indicator for each
burner. This indicates that a burner is still hot. Do not
touch a burner while the residual heat indicator is lit up
or immediately after it goes out.
The following are shown depending on the amount of
residual heat:
Display •: High temperature
▯
Display œ: Low temperature
▯
and the illuminated ring around the control knob will
flash.
If the cookware is removed from the burner while cooking
is in progress, the heat setting indicator will flash, and
the control knob will be lit orange.
Turn the control knob to the 0 position.
If the burner is switched off, the residual heat indicator
will be lit, and the illuminated ring around the control
knob will flash. Even after the cooktop has been switched
off, the residual heat indicator will remain lit for as long
as the burner is still warm.
en-us
15