Basic Settings; Changing The Basic Settings - Gaggenau CI 491 602 Notice D'utilisation

Basic Settings

The appliance has various basic settings. You can
adjust these settings to the way you usually cook.
™‚
Deactivating the beep
A short beep confirms that an icon has been touched, a long
beep warns that an incorrect operation has been performed.
™ƒ
Child lock
This function allows the childproof safety function to be acti-
vated.
™„
Returning to the cooktop default settings
This function reases the settings that were made with the spe-
cial function menu by using the setting menu š.
™...
Element selection
The last programmed element always remains selected. This
can be changed. The element will only remain selected for
5 seconds. To activate and to deactivate the function, select
£. or £ with the setting control.
™†
Power Management Function
This function is used to limit the total power of the cooktop.
There are 19 levels. The intermediate levels are marked with a
dot.
*Basic settings
--------

Changing the basic settings

The cooktop has to be turned off.
1 Turn on the cooktop using the main switch.
In the next 10 seconds, the t indicator will
2
appear. Touch the symbol <for at least
4 seconds, until you hear the second confirmation
beep.
' and ‚ also appear in the timer display.
Touch <until the desired function indicator is
3
displayed.
‹ most of the signals are off
‚ all the signals are on*
‹ child lock activation not allowed*
‚ child lock activation allowed
š return to default settings
£ activated setting
£. deactivated setting
‚ = 1000 W minimum power
‚. - Š = 1500 to 9000 W
Š. = 9500 W maximum power
4 Select the desired value using the knob. Turn the
knob to the desired setting. The selected value
will be indicated with a dot (see figure).
Touch < again for at least 4 seconds, until a
5
beep sounds to confirm.
The settings have been correctly stored.
Quit basic settings menu
To leave the basic settings menu, turn off the cooktop
with the main switch.
21