Graef DA 506 Mode D'emploi page 26

Insert the plug into the
●
socket.
Press "+" or "-" in
●
order to increase or
decrease the number
of hours. (Maximum 40
hours)
Then press the "SEL"
●
button, the tempera-
ture display will then
flash.
Having done the settings, press the START / STOP button. The green lamp illu-
●
minates and the dehydrating process will start.
After completion of the dehydrating process (timer shows 00.00), switch off
●
the unit.
26
Switch the unit on. The
●
timer is on 00:00 and
the temperature on
50°C.
Then press the "SEL"
●
button, the minute
display will then flash.
Press "+" or "-" in
●
order to increase or
decrease the tempera-
ture.
Keep holding the "SEL"
●
button for approx. 3
seconds until the hour
display flashes up.
Press "+" or "-" in
●
order to increase or
decrease the number
of minutes.
To confirm, press the
●
OK button.