DT SWISS R 535 ONE Manuel D'utilisation page 15

3.2 MOUNTING SHOCKS WITH SPHERICAL BEARINGS
The spherical bearings shown are already fitted to these shocks. The
mounting hardware (pin, sleeves, O-rings) suitable for your bike frame is
available separately. Consult the manufacturer of your bicycle frame
for the correct dimensions of the hardware. For instructions on
installing the mounting hardware, refer to the Technical Manual
for this shock at www.dtswiss.com.
For this type, there are restrictions with regard to the mounting position:
→ Ensure both shock eyelets are mounted
vertically and are oriented in the same
plane.
→ Do not use any shock mount that is vertical
and sits directly on the shock.
→ Ensure that the shock mount on the bicycle
frame allows the spherical bearings (1) to
move freely.
1 ball
1
R 535 ONE - User Manual V2021.09
2
1
2 plastic ring 3 shock eye
3
15