Publicité
Les langues disponibles
Les langues disponibles
26
9
CLEANING AND MAINTENANCE
General cleaning
• Maintenance and cleaning operations may only be carried
out when the machine has cooled down and has been
disconnected from the power supply.
• Do not immerse the machine in water or place any of its
parts in a dishwasher.
• Do not use sharp objects or harsh chemical products
(solvents) for cleaning.
• Clean the pannarello after every use. Remove the external
part of the pannarello.
Wash the external part of the pannarello under running
water.
• For a thorough cleaning, remove the pannarello from the
steam spout.
Loosen the ring nut and remove the internal part of the
pannarello. After washing it thoroughly, reassemble it taking
care to position it as shown in the fi gure.
(Fig. 25) - Clean the water tank on a daily basis.
- Remove the fi lter in the water tank and wash it under
drinking running water.
CLEANING AND MAINTENANCE
- Reinsert the fi lter into its seat by gently pressing and
turning it.
- Fill the tank with fresh drinking water.
• Use a soft cloth moistened with water to clean the
appliance.
• Do not dry the machine and/or its components using a
microwave and/or conventional oven.
• (Fig.32) - Remove the dispensing spout by pulling it
outwards and wash it with lukewarm water. After washing
it, fi t it back in its seat by pushing it to its limit stop.
• (Fig. 31 - 34) - Clean the dispensing outlet. We recom-
mend emptying and cleaning (on a daily basis):
- the grounds drawer (8)
- the drip tray (10)
9.1
Brew Group
• The Brew Group (15) must be cleaned every time the
coff ee bean hopper is fi lled or at least once a week.
• Turn off the machine by pressing the main power button
(5) to -0- and remove the plug from the socket.
• (Fig. 31 - 34) - Remove the grounds drawer (8) and the
drip tray (12). Then open the service door (13).
• (Fig. 35) - Remove the Brew Group (15) by the handle and
press the «PRESS» key. The Brew Group must be cleaned
only with warm water and no detergents.
• (Fig. 36) - Wash the Brew Group with lukewarm water
and carefully clean the upper fi lter.
• Thoroughly wash and dry all the parts of the Brew Group.
• Thoroughly clean the dispensing outlet.
• Reinsert the Brew Group in the dispensing outlet clicking it
into place WITHOUT pressing the "PRESS" key.
• Close the door, insert the grounds drawer and the drip
tray.
Publicité
