Télécharger Imprimer la page

Philips SUP 018M Mode D'emploi page 24

Masquer les pouces Voir aussi pour SUP 018M:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
24
5
COFFEE GRINDER
Caution! The grinder adjustment knob, inside
the coff ee bean hopper, must be turned only
when the grinder is working. Do not pour ground and/
or instant coff ee into the bean hopper.
Do not insert any material other than coff ee
beans into the hopper. The grinder contains
moving parts that may be dangerous. Therefore, do
not insert fi ngers and/or other objects. Turn the main
power button to off and remove the plug from the so-
cket before carrying out any type of operation inside
the bean hopper. Do not pour coff ee beans when the
grinder is working.
(Fig.24) - The quality and fl avour of coff ee depend on the
grind, as well as on the blend used. The machine has a knob
(3) to adjust the coff ee grind. Turn the knob when the grinder
is working to adjust the grind. The digits on the knob indicate
the grind.
The manufacturer confi gures each appliance on an interme-
diate grind setting: if the grind is too fi ne, rotate the knob to
a higher setting; if the grind is too coarse, turn the knob to a
lower setting.
The variation in grind will only be seen when three/four
coff ees have been brewed.
Use coff ee bean blends for espresso machines. Try not to use
very high or very low grind settings (e.g. 1 - 16). Use diff erent
coff ee blends for diff erent settings. Keep coff ee in a fresh
place in a sealed, airtight container.
The grind must only be regulated if coff ee is not brewed
properly:
Too fast brewing = too coarse grind > Rotate the knob to a
lower setting;
Drip and/or absent brewing = too fi ne grind > Rotate the
knob to a higher setting.
COFFEE GRINDER - COFFEE BREWING
6
COFFEE BREWING
Note: If the machine does not brew coff ee,
make sure that the water tank contains enou-
gh water by verifying the water level on the left side
of the machine.
Before brewing coff ee, make sure that the
green temperature ready light (19) is per-
manently on and that the water tank and the coff ee
hopper are full.
• (Fig. 27 - 28) - Place 1 or 2 cups beneath the dispensing
spout (11). You may adjust the height of the dispensing
spout to your cups.
• Adjust the desired quantity of coff ee to be brewed by
means of the knob (17): by turning the knob clockwise the
quantity of coff ee to be brewed is increased; by turning
the knob counterclockwise the quantity of coff ee to be
brewed is decreased.
• Press the button (18) to brew coff ee. The brewing cycle
starts: press the button (18) once to brew 1 coff ee. Press it
twice to brew 2 coff ees.
In this operation mode, the machine grinds
and measures automatically the right quan-
tity of coff ee. Two coff ees require two grinding and
brewing cycles that are automatically managed by the
machine.
• After the prebrewing cycle, coff ee begins to come out of
the dispensing spout (11).
• On reaching the dose programmed with the knob (17), the
machine will automatically stop brewing. It is nevertheless
possible to interrupt coff ee brewing by pressing the button
(18).

Publicité

loading