What The Lcd Icons Mean; Changing The Receiver/Collar Location Light Color - Dogtra 4500 Edge Notice D'utilisation

To change the program setting, follow the steps below.
Push
simultaneously
4. The display on the LCD screen will now show the icon for the
rheostat/volume or the selector/step. Repeat the steps from the
beginning, to switch back and forth from the rheostat/volume and the
selector/step style of intensity control.
Icon for the rheostat/volume
52
1. Set the transmitter's intensity
dial to 0.
2. Set the mode dial to "P".
3. Simultaneously hold down the
black button on the front of the
transmitter, along with the on/off
blue button on the back of the
transmitter.
Icon for the selector/step

9. WHAT THE LCD ICONS MEAN

The icons on the LCD screen on the transmitter are listed below.
Nick
Constant
Pager
Light
Rheostat/volume intensity control
Selector/step intensity control
Battery life indicator

10. CHANGING THE RECEIVER/COLLAR LOCATION LIGHT COLOR

The 4500 EDGE receiver/collar location light can be set to any of the 4
colors offered.
To change the receiver/collar location light to white, red, green, or blue,
follow the instructions below,
1. Start with the receiver/collar turned off.
2. Hold down the on/off button on the receiver/collar for 10 seconds.
* Attention: The on/off button must be pressed for a full 10 seconds.
3. Release the on/off button after the white location light flashes rapidly.
The white location light will start flashing after the single green(small)
LED indicator code setting light finishes blinking.
4. Press the on/off button once to set the desired color.
* The location light colors will rotate in the order of white, red, green,
and blue for two full rotations.
* The location light color will reset to the corresponding color when re-
coded to another button.
53