The Handheld Transmitter Lcd - Dogtra ARC 1200S Guide D'utilisation

1. Attach the charging cables to both the transmitter and
receiver(s), as shown on page 47.
2. Plug the charger into a 120-volt wall outlet or if using
only for Lithium-Polymer batteries (use a 230-volt
European charger for Europe.). When properly plugged
in, all indicator lights should glow red. During the
cable is unplugged from the unit after a full charge,
you will need to turn the unit on again before use.
3. The Lithium-Polymer battery is fully charged within
2 hours. The lights will stay red during the charging
process. The red light will change into a steady green light
when the battery is fully charged (when you disconnect
restart the unit).
4. After charging, cover the battery charging receptacles
with the rubber plugs on the transmitter and receiver/
collar.
NOTE : Only use Dogtra-approved batteries, chargers, and
accessories for your Dogtra e-collars. When a charger is not
in use, disconnect it from the power source.
Charger Info
Manufacturer : HON-KWANG
Manufacturing country : CHINA
Model name : HK-AW-100A150-EU
INPUT : 100~240V~50/60Hz 0.4A / OUTPUT : 10V 1.5A
ATTENTION
!
During battery charging, the unit must be close to the wall
outlet and the wall outlet must be easily accessible for
security reasons.
48

8. THE HANDHELD TRANSMITTER LCD

The LCD screen indicates the stimulation level (0-127).
The LCD battery life indicator shows 3 bars at full charge,
2 bars at medium charge and 1 bar when it needs to be
your receiver, observe the LED indicator on the receiver/collar.
Green = full charge
Amber = medium charge
Red = needs charge
Care for LCD Transmitters in Cold Temperature
In cold temperatures (10 degrees F or below), the Liquid
Crystal Display (LCD) on your transmitter may be dim or
slow to respond. Wait until the display becomes visible before
selecting any training level. Even though the LCD screen
might be dim or slow to respond when you push the Nick or
Constant button, the transmitter will still function properly.
In the occurrence of extremely cold weather, the LCD screen
might take a moment to respond causing the intensity level to
freeze at that current level. In this situation, if you turn the
49