Understanding Your Training System; How To Turn The Arc1200S On/Off; How The Transmitter Buttons Work - Dogtra ARC 1200S Guide D'utilisation

UNDERSTANDING YOUR TRAINING
SYSTEM

1. HOW TO TURN THE ARC1200S ON/OFF

To turn the handheld transmitter on, hold down the button
on the right side of the transmitter until the LCD screen
button on the right side of the transmitter until the LCD
until the LED indicator turns green. To turn the receiver/
indicator turns red.
40
Button

2. HOW THE TRANSMITTER BUTTONS WORK

ARC1200S
The transmitter for the ARC1200S single dog unit has four
buttons (one on the face of the transmitter, two on the left
side and one on the right side).
Nick
button
Constant
button
Nick Button
The "Nick" button is located on top on the left side of the
handheld transmitter. When the "Nick" button is pressed the
receiver emits a single pulse of electrical stimulation.
Constant Button
The "Constant" button is located on the bottom on the left
side of the handheld transmitter. Pressing the "Constant"
button gives continuous stimulation as long as the button is
pushed, for up to 12 seconds. If the button is not released
as a safety feature. The collar will be ready to be reactivated
once the button has been released.
Pager
button
41