Understanding Your Training System; How To Turn The 640C On/Off; How The Transmitter Buttons Work - Dogtra 640C Guide D'utilisation

UNDERSTANDING YOUR TRAINING
SYSTEM

1. HOW TO TURN THE 640C ON/OFF

To turn the handheld transmitter on, hold down the button
on the right side of the transmitter until the LCD screen
illuminates. To turn the transmitter off, hold down the same
button on the right side of the transmitter until the LCD screen
shuts off.
To activate the receiver/collar, place the red dot on the back of
the transmitter to the red dot on the receiver/collar. Hold the
two red dots together for a moment until the LED light on the
receiver/collar comes on.
To deactivate the unit, repeat the same procedure holding the
two red dots together momentarily. The LED light will turn red
for a brief moment indicating that the receiver/collar is now
shut off.
38
On/off
Button

2. HOW THE TRANSMITTER BUTTONS WORK

640C
The transmitter for the 640C single dog unit has four
buttons (one on the face of the transmitter, two on the left
side and one on the right side).
Nick
button
Constant
button
Nick Button
The "Nick" button is located on top on the left side of the
handheld transmitter. When the "Nick" button is pressed the
receiver emits a single pulse of electrical stimulation.
Constant Button
The "Constant" button is located on the bottom on the left
side of the handheld transmitter. Pressing the "Constant"
button gives continuous stimulation as long as the button is
pushed, for up to 12 seconds. If the button is not released
after 12 seconds, the stimulation will automatically turn off
as a safety feature. The collar will be ready to be reactivated
once the button has been released.
On/off switch
Pager
button
39