Maintenance - Dogtra 640C Guide D'utilisation

off the light stimulation by performing the command.
E-collar training is another form of negative reinforcement,
similar to the leash and standard collar training. When the
dog complies with the command, we use praise/positive
reinforcement.
The final step is the avoidance phase in which the dog learns
that he can avoid the stimulation altogether by performing
your commands. When these training procedures are
complete, the electric collar is used as a reminder when the
dog does not comply with your commands at home or in the
field. Keep your initial training sessions short and positive.
Dogs have a short attention span, especially young dogs.
How much stimulation to use
Always start with low levels of stimulation and work your
way up depending on the disposition of your dog and
any given situation. By using only enough stimulation to
get your point across, you will have a more controllable
environment and a dog that is under less stress. Animals
(and humans) perform better in a less stressful environment.
For more training information, please consult with a
professional dog trainer.
50

MAINTENANCE

Basic maintenance
Be sure the rubber-charging cap is securely in place
when the collar is in use. After each training session,
carefully inspect the unit for any missing parts or damage
to the casing. Damaged or broken casing may affect the
waterproof guarantee on the unit. After confirming that
there is no damage to the casing, rinse the receiver/collar
and clean out any dirt or debris.
Storage maintenance
The 640C should be fully charged before storing for
extended periods. While in storage, the unit should be given
a full charge once a month, and before the first use. Store the
units in room temperature. Do not keep the units exposed to
extreme climates.
Troubleshooting
If the unit is malfunctioning, please refer to the
"Troubleshooting Guide" before sending it to Dogtra for
service. If you have any questions or concerns, you may
email them to info@dogtra-europe.com, or call customer
service at +33 (0)1 30 62 65 65.
51