Testing Your Anti-Bark Collar - Dogtra YS 300 Mode D'emploi

DESCRIPTION
Collar Strap Adjust
The collar strap of the YS300 can be adjusted 3
steps as shown in the diagram above.
To adjust the collar strap, first unscrew the contact
points and put screws in desired holes, then tighten
the contact points as shown below.
36

TESTING YOUR ANTI-BARK COLLAR

1. Turn the YS300 on by turning the ON-OFF &
Intensity Dial and select "TEST" Level so that
the arrow on the dial is aligned with the "test"
line.
The LED indicator light will flash 1 second to
indicate that it is on, after 2 seconds it will flash
every 2 seconds. If the dog does not bark over 10
seconds, it will turn to the Sleep mode to save
battery life and the LED will turn off.
TESTING
37