Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DESCRIPTION
ON-OFF &
Intensity Dial
ON-OFF & Intensity Dial
The ON-OFF & Intensity Dial on the collar is used
to turn the YS300 on and off, to select the intensity
level, and to test the YS300.
Set the ON-OFF & Intensity Dial on the "OFF"
position to turn off the YS300.
Level P(non-stimulation) causes the collar to only
vibrate. Level 2 is lowest electrical stimulation and
Level 7 is the highest. From Level 2 to Level 7, a
vibration is followed by stimulation.
32
Set the ON-OFF & Intensity Dial on TEST position
as shown above to test the YS300 (See "TESTING
THE ANTI-BARK COLLAR" on page 37.).
ON-OFF & Intensity Dial
OFF
P
Vibration only (non-stimulation)
2~7
Stimulation follows a vibration
TEST
Test the ANTI-BARK COLLAR
NOTICE :
When first using the YS300, it is recommended that
you start with the lowest level.
If the dog continues to bark, gradually increase the
intensity level.
DESCRIPTION
Function
Power OFF
33
Publicité
Table des Matières
