How To Change The Stimulation Intensity - Dogtra 4500 Edge Notice D'utilisation

* The transmitter and receiver/collar rubber-charging cap ensures dirt
and debris does not build up in the charging port area. The unit is
waterproof even if the rubber-charging cap is not fully closed.
To charge multiple receivers/collars and a transmitter, combine
additional battery charger splitter cables as shown.
* Warning
1. Fully charge the unit before the first use.
2. Do not charge the unit near any flammable substances.
3. Fully charge the unit before storing for one month or longer.
4. Always use Dogtra approved charging adapters. When the wrong
charging adapter is used, the LED indicator will not turn on or blink
amber.
50

8. HOW TO CHANGE THE STIMULATION INTENSITY

The Dogtra 4500 EDGE has the ability to switch between the rheostat/
volume intensity and the selector/step intensity.
The 4500 EDGE unit comes installed with the rheostat dial knob in
place. To switch to the selector/step dial, follow the steps below.
1. Turn the stimulation level to 0.
2. Unscrew the top of the dial with a flathead screwdriver counter-
clockwise.
3. Remove the current dial knob and replace with the desired intensity
dial type.
4. While firmly holding the dial knob in place, tighten the screw
clockwise.
Next, change the program setting to the corresponding intensity dial
type.
51