How To Fit The Collar On The Dog - Dogtra iQ Guide D'utilisation

2. HOW THE BUTTONS WORK
There are three buttons in front of the
transmitter.
40
2. How the buttons work
N - Nick button
Nick is a single rapid pulse of electrical
stimulation.
C - Constant button
Constant gives constant stimulation as
long as the button is pushed, for up to 12
seconds. The unit has an automatic shut off
should the button be depressed for more
than 12 seconds.
P - Pager button
Pager is a non-stimulating vibration.

3. HOW TO FIT THE COLLAR ON THE DOG

The collar should be fitted so that the
surgical stainless steel contact points
press firmly against the dog's skin. When
properly fitted, you should be able to fit
a finger or two snugly in between the
contact points and your dog's skin. When
properly fitted, the receiver/collar should
not move on the dog. The best location for
the receiver box is either side of the dog's
windpipe.
A loose fit can allow the receiver/collar
to move around on the dog's neck. When
this happens, the contact points may rub
the skin and cause irritation. If the collar
is too tight, the dogs may have difficulty
breathing.
3. How to fit the collar on the dog
41