Maintenance; Accessories And Spare Parts; Basic D 60, Ø 200 - 505 Mm; Cover Plates - WOHLHAUPTER Alu-Line Série Mode D'emploi

5. Maintenance

No maintenance!
To ensure the tool has a long service life, it must be cleaned after use. A light film of
oil should be applied to the visible, uncoated steel parts from time to time.
6.1 Basic D 60, Ø 200 – 505 mm (Ø 7.87" – 19.88")
Fixings for precision boring
tool 537digital and 337 and
counter weight (not included
in the equipment supplied)
Serrated Cap screw

slide
Order No. Order No. (torque)
349 001 115 170 s14/C (65 Nm)
349 002 115 170 s14/C (65 Nm)
349 003 115 170 s14/C (65 Nm)
349 004 115 170 s14/C (65 Nm)
65 Nm = 575.30 in.lbs

Cover plates

(only for boring range Ø 200 – 505 mm (7.87" – 19.88")
and combinable only with insert holders)
Serrated slide Cover plate
Order No. Order No.
349 001 349 016
349 002 349 017
349 003 349 017
349 004 349 017
Order No. for cover plate
4
=
;
Clamping
=
Key bolt
Order No.
115 669
115 669
115 669
115 669
1
Countersunk screw
Order No. (torque)
063 106 s4/B (8 Nm)
063 106 s4/B (8 Nm)
063 106 s4/B (8 Nm)
063 106 s4/B (8 Nm)
1 2
incl. cap screw
(
; 
%
Cap screw
Key
Order No. (torque)
115 118 s8/B (35 Nm)
115 118 s8/B (35 Nm)
115 118 s8/B (35 Nm)
115 118 s8/B (35 Nm)
35 Nm = 309.78 in.lbs
2
Key
8 Nm = 70.81 in.lbs.
&
&
Thread pin
Key
Order No.
115 196 s4/F
115 196 s4/F
115 196 s4/F
115 196 s4/F
English
Threaded
(
pin
Order No.
141 112
141 113
141 114)
141 115
1
2
25