Required Torque - WOHLHAUPTER Alu-Line Série Mode D'emploi

nglish
Requiered Torque
Finish machining, double-edged, GGG-50, Vc = 150 m/min., ap = 1,0 mm
Boring range (mm)
Rough machining, double-edged, GGG-50, Vc = 150 m/min., ap = 1,0 mm
Boring range (mm)
The calculated torques are theoretical values that are strongly influenced by
machining conditions. The value for the feed rate (f) and cutting depth (ap) are
almost linear to the resulting torque – i.e. double feed results double torque.
34