Intended Use - Assa Abloy effeff 352M Notice D'installation Et De Montage

Intended use

Electrical locking devices of doors along escape routes are intended for use in
commercial applications.
The product is used to lock doors. The product is suitable for horizontal or
vertical installation in the door frame or door leaf.
The product has been designed for safeguarding escape routes and has been
tested to the requirements specified in the German guidelines on electrical
locking systems for doors in escape routes (EltVTR) and DIN EN 13637 in suit-
able system configurations. Permissible combinations can be found in the
corresponding test certificates.
The installation instructions must be observed if an escape-door control system
is used. Deviating uses or device combinations not described are not permitted.
ASSA ABLOY Sicherheitstechnik GmbH can provide the necessary planning infor-
mation for approved solutions and the device combinations required for your
application. The usage must be coordinated with the requirements of the
inspection authorities. Please contact the responsible inspection authority for
this purpose.
Compliance with all relevant inspection authority requirements is mandatory
for the use, particularly with respect to the
· coordination of the safety concept with the responsible inspection authority
and
· modifications of door elements.
The device is suitable for installation, configuration and use, according to these
instructions. Any use beyond this is deemed as non-intended use; devices
combinations which are not described are not permitted.
Safety instructions EN 35