Assa Abloy effeff 352M Notice D'installation Et De Montage page 49

Installation of the escape door locking system 352M with screw-on housing
1 Prepare the door frame profile. ASSA ABLOY Sicherheitstechnik GmbH
recommends using one-rivet nuts to fit the mounting bracket.
2 Screw the mounting bracket onto the door frame profile.
3 Drill the hole for the escape door locking system 352M cable inlet.
4 Screw the escape door locking system 352M to the mounting bracket in the
cover.
5 Screw the cover onto the mounting bracket.
 You have installed the escape door locking system 352M with screw-on
housing.
Mounting the striking plate with the screw-on casing
1 Prepare the door leaf profile. ASSA ABLOY Sicherheitstechnik GmbH recom-
mends using one-rivet nuts to fit the mounting bracket.
2 Screw the mounting bracket onto the door leaf profile.
3 Mount the striking plate with screws and fixing plates. If necessary, you will
need to place the supplied spacer plates beneath to ensure the correct
distance between the locking element and the striking plate. The fixing
plates are used to fix the striking plate into position.
4 Screw the cover onto the mounting bracket.
 You have fitted the striking plate with the screw-on casing.
Mounting EN 49