Assa Abloy effeff 352M Notice D'installation Et De Montage page 34

!
Warning!
Life-threatening hazard in the case of incorrect mounting and installation:
The escape door locking system may only be mounted, installed and operated
in the permitted device combinations as indicated in the escape route control
system installation instructions.
A
Attention!
Impaired function due to incorrect rebate gap: The rebate gap ("Explanation
of terms", page 36) must be suitably adjusted ("Technical data", page 52).
Working on the door frame: When working near the lock, such as drilling or
milling, the lock must be removed.
Damage caused by opening: The lock must not be opened; otherwise, it will
become damaged and the warranty will become void ("Mounting on the door
frame with screw-on casing", page 46)
Property damage from painting: Do not coat the locking mechanism, striking
plate or counterpart with paint or other substances.
Damage caused by water and moisture: The lock must be protected against
penetrating water. Water impairs the function of the lock.
Comply with EMC Directive: The conductor cross-section must not be enlarged
by installing individual lines in parallel. Always use individual lines with a suffi-
ciently large cross-section to ensure electromagnetic compatibility.
34 EN Safety instructions