Publicité
Les langues disponibles
Les langues disponibles
THE PERSISTENT BARK INDICATOR
he Persistent ark Indicator activates when the unit is
turned o and when there has been excessive barking.
1. Without excessive barking:
– he LED will glow red or 2 seconds when the unit is
turned o .
2. With excessive barking:
– he LED will blink green or 10 seconds when the unit is
turned o .
– Excessive barking may indicate that the stimulation
intensity level is set too low.
* e ore increasing the stimulation intensity level, check to see
that the collar has a proper t and both contact points are
touching your dog's neck.
24
TESTING THE YS600
1. urn the dial to " ". he LED indicator will blink once every
4 seconds.
2. se the cap end o a ballpoint pen and scratch between the
contact points. he unit is working properly when it vibrates
twice.
* he sensor is set to high sensitivity on test mode to activate
more easily. he test mode will only produce a non-
stimulating vibration.
25
Publicité
