Dogtra YS 600 Notice D'utilisation page 15

CHARGING THE BATTERY
1. pen the rubber plug on the YS600 and connect the charger to
the battery charging receptacle as shown in the picture.
2. Plug the charger into an electrical power outlet (220V).
3. While the battery is recharging, the LED will stay on red. he
LED light will become green when the battery is completely
recharged (the battery is ully charged a ter 2 hours).
Note: nly use Dogtra approved Lithium Polymer attery
chargers designed or the YS600. on-Dogtra chargers could
potentially damage the unit.
26
COLLAR FITTING
It is important to have a proper t. A loose t will provide an
inconsistent stimulation and the unit will move around on your
dog's neck, which may cause irritation. With a proper t, you
should be able to t a nger or two snugly between the contact
points and your dog's skin. he unit should stay in place and not
be able to slide around your dog's neck.
* Caution
Remove all other collars when using the o ark Collar.
Additional collars or buckles that rub against the o ark Collar
may inadvertently activate the unit.
27