Using The Grater And Cutting Disc - SilverCrest SFPM 600 A1 Mode D'emploi

11. Using the grater and
cutting disc
Application area:
The grater and cutting disc 16 is suitable for
grating and cutting vegetables, fruit, pota-
toes and cheese. Both sides can be used.
On the one side for grating and on the other
side for cutting slices.
The tool you want to use must be on top:
Cutting
Grating
WARNING! Risk of material dam-
age!
Do not exert too much pressure on the
grater and cutting disc 16. Apply an
even pressure so that the motor does not
become blocked.
Processing table:
Ingredi- max.
ents quantity
Carrots 300 g
Leeks 300 g
WARNING! Risk of material dam-
age!
Do not operate the device continuously
with the grater and cutting disc 16 in
place for more than 5 minutes. After
this, the device must remain switched off
until it has cooled down to room temper-
ature.
Required accessories:
- Axle 9
- Working container 8
- Grater and cutting disc 16
- Lid 3 with food pusher 1
NOTE: The adapter 7 is not required for
mounting the grater and cutting disc 16.
Work steps:
1. Figure B: place the axle 9 on the base
unit 12.
2. Figure C: position the working con-
tainer 8 in position a on the base
unit 12. Turn the working container
clockwise slightly until it audibly clicks
into position b.
3. Position the grater and cutting disc 16
on the axle 9 in such a way that the
Processing
Grating/Cutting: set-
1
ting
max. 5 min.
1
Cutting: setting
max. 5 min.
GB
43