SilverCrest SFPM 600 A1 Mode D'emploi page 47

DANGER! Risk of injury from
cutting!
Please remember that the blades of the
blender jug 13 are very sharp:
- Never touch the blades with your
bare hands in order to avoid cuts.
- When emptying the blender jug 13,
ensure not to touch the blades.
WARNING! Risk of material dam-
age!
Do not use the blender jug 13 for pro-
cessing particularly hard foodstuffs,
such as frozen food, bones, nutmeg, ce-
real grains or coffee beans.
Do not operate the device continuously
with the blender jug 13 in place for
more than 5 minutes. After this, the de-
vice must remain switched off until it has
cooled down to room temperature.
Required accessories:
- Blender jug 13
- Lid 14
- Mini measuring cup 15
Work steps:
1. Position the blender jug 13 in position
a on the base unit 12. Turn the blender
jug slightly clockwise until you can feel
it click into position b.
P
0
2. First add the liquid ingredients to the
3. Place the lid 14 on with a slight offset
4. Turn the lid 14 clockwise (towards the
5. Place the mini measuring cup 15 into
6. Connect the mains plug 10 to a wall
a
7. Use the dial 11 to select the desired
During blending, you can add ingredients
through the refill opening in the lid 14:
b
8. Reduce the speed to 1.
9. Pull out the mini measuring cup 15 up-
10. Add the ingredients.
11. Place the mini measuring cup 15 back
blender jug 13, and then the solid
ones.
(see illustration).
closed lock symbol
place.
the refill opening.
socket.
speed setting.
wards. If you find this difficult, turn it
back and forth a little as you pull it out.
on.
) until it clicks into
45
GB