SilverCrest SFPM 600 A1 Mode D'emploi page 35

DANGER! Risk of electric
shock
Only plug the mains plug into the wall
socket after the device has been com-
pletely assembled.
Only connect the mains plug to a prop-
erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must still be easily ac-
cessible after the device is plugged in.
Ensure that the power cable cannot be
damaged by sharp edges or hot spots.
Do not wrap the power cable around
the device.
Even after it has been switched off, the
device is not completely disconnected
from the mains. In order to fully discon-
nect it, pull out the mains plug.
Ensure that the power cable never be-
comes a trip hazard, and that nobody
can get caught up in or step on it.
Keep the power cable away from hot
surfaces (e.g. hot plates).
When using the device, ensure that the
power cable cannot be trapped or
crushed.
When removing the mains plug from the
wall socket, always pull on the plug and
never the cable.
Disconnect the mains plug from the wall
socket ...
... if there is a fault,
... when you are not using the food pro-
cessor,
... prior to assembling or disassembling
the food processor,
... prior to cleaning the food processor
... during thunderstorms.
Do not use the device if there is visible
damage to the device, accessories or
power cable.
In order to avoid any hazards, do not
make modifications to the device.
DANGER! Risk of injury
from cutting
Never bypass the safety functions!
Never reach into the rotating blades. Do
not touch rotating parts with spoons or
similar utensils. Keep long hair and loose
clothing away from the rotating parts.
Please remember that the blades contin-
ue to turn for a short time after switching
off the device.
Please note that the blades of the blade
assembly, the blender jug and the grat-
er and cutting disc are very sharp. Nev-
er touch the blades with your bare
hands in order to avoid cuts.
When rinsing by hand, use water which
is so clear that you are able to see the
blades properly in order to ensure that
you do not injure yourself on the very
sharp blades.
DANGER from rotating
parts
Do not touch rotating parts with spoons
or similar utensils. Keep long hair and
loose clothing away from the rotating
parts.
Always ensure that the speed control is
set to 0 before you plug the mains plug
into the wall socket.
Switch the device off and pull out the
mains plug from the wall socket before
you exchange auxiliary or additional
equipment moving in operation.
WARNING! Risk of material
damage
Place the device exclusively on a level,
dry, non-slip and waterproof surface, so
that it can neither fall nor slip off.
Never place the device on a hot sur-
face, e.g. a hot plate.
Do not change the position of the de-
vice, as long as there is still food or
dough in the device.
33
GB