Safety Functions - SilverCrest SFPM 600 A1 Mode D'emploi

7.3

Safety functions

In order to minimise the risk of injury, the
food processor can only be started if certain
accessories have been assembled correctly.
DANGER! Risk of injury!
Never bypass the safety functions!
The principle: marking
Wherever you see the lock symbols and a
dot, the same principle applies.
1. Placing the upper accessory in
position:
Mount the upper accessory with the
marking pointing to the open lock
symbol .
2. Turning clockwise:
Turn the upper accessory clockwise until
it clicks into place.
3. Correctly assembled:
When the accessories have been cor-
rectly assembled, the
to the closed lock symbol
• In order to remove this, turn the upper
accessory anticlockwise until the
marking points to the open lock
symbol . You can then lift off the ac-
cessory.
Lid
There is a lock symbol
for mounting the lid to the blender jug 13.
The blender jug has no marking on the top.
1. Place the lid 14 on with a slight offset
+ /
2. Turn the lid 14 clockwise (towards the
• To remove, turn the lid 14 anticlockwise
marking points
.
NOTE: you can remove the food pusher 1
and the mini measuring cup 15 while the
device is running.
of the blender jug
14
(see illustration).
closed lock symbol
place.
(in the direction of the open lock
symbol ) until you can lift the lid 14
upwards.
13
/ on the lid 14
) until it clicks into
37
GB