Manual Ip Address Entry - Kemper AirWatch Mode D'emploi

2.6 Manual IP address entry

When selecting "WiFi/WLAN" or "Ethernet", you also have the option to assign the IP
address automatically (per DHCP) or govern it manually. For manual IP address
entry, disable the button marked red under heading 2 in diagram X. Thereupon, a
mask for entering IP addresses appears:
− The waste disposal container, with the separated materials, is to be disposed of
accordingly in an environmentally friendly manner, while observing the regulations
specific to the country.
Part no.: 150 2608
All rights over changes without prior notice and errors reserved.
KEMPER AirWatch operating instructions - EN
- 50 -
Issue: 03/2017
Rev.: 00