Wilo Drain TS Notice De Montage Et De Mise En Service page 14

English
5. Product information
5.1 Type key
Example: TS 32/9 A -10M KA,
TSW 32/8 A -10M KA
Series: T = submersible pump
TS
W
with turbulator
Nominal diameter of pressure port [mm]:
32
32 = Rp 1¼
/8
Max. delivery head [m] when Q=0m³/h
A
A =with float switch
-10M KA
Length of mains connecting cable [m]: 10
5.2 Technical data
Mains voltage:
Mains frequency:
Protection class:
Insulation class:
Speed:
Max. current consumption:
Power consumption P1:
Max. flow rate:
Max. delivery head:
Operating mode:
Operating mode S3 (optimum):
Recommended switching frequency:
Max. switching frequency:
Free ball passage:
Nominal diameter of the pressure port:
Admissible fluid temperature:
briefly 3 min.:
Max. submersion depth:
Flat suction up to:
5.3 Scope of delivery
Pump with
• 10 metre connecting cable with mains plug
• Connected float switch (design-A)
• Turbulator (TSW)
• Hose connection (Ø 32 mm / R 1)
• Non-return valve
• Installation and operating instructions.
14
S = wastewater
1~230 V, ± 10 %
50 Hz
IP 68
B
2900 rpm (50 Hz)
See name plate
See name plate
See name plate
See name plate
4000 operating hours a year
Intermittent duty, 30 %
(3.0 min. operation, 7.0 min. interval).
20/h
50/h
10 mm
Ø 32 mm (Rp 1¼)
+3 to 35 °C
90 °C
10 m
8 mm (TSW: 18 mm)
5.4 Accessories
Accessories must be ordered separately (see
catalogue):
• Switchgear for 1 or 2 pump operation
• External monitoring devices / tripping unit
• Level control (e.g. flow switch)
• Accessories for transportable wet sump installa-
tion (e.g. hose couplings, hoses, etc.).
• Accessories for stationary wet sump installation
(e.g. check valves, non-return valves, etc.).
WILO SE 09/2014