Panasonic EP-MAK1 Mode D'emploi page 44

(pour usage domestique) fauteuil vibromasseur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Q&A
(continued)
Question
How to adjust the <Intensity>
The auto course is "not strong
enough even at the strongest
setting..." or is "too strong even
at the weakest setting...".
The hip massage is weak ...
Can hand & arm massage be
performed simultaneously?
I hardly feel any difference in
intensity in the sole roller even
after adjustment ...
Sole roller is too intense even at
the gentlest setting ...
EN44
Try the following methods.
Maximum intensity is set for a course but the intensity is insufficient.
Leaning back the backrest results in more body weight pressing
against the main unit for stronger massaging.
Minimum intensity is set for a course by the intensity is excessive.
Placing cloth or blanket over the backrest can soften the contact
sensation of massage rollers.
Please sit further in.
When you sit further in, the gap between the backrest and the
hip becomes smaller, making it easier for the massage rollers to
contact your body.
(EN30)
Massaging is performed alternately, to ensure that the user can
stop the operation whenever any anomaly or danger is sensed.
The sole roller intensity is adjusted by the strength of the foot side
air pressure holding the soles.
Therefore, depending on the operating pattern, intensity difference
may not be felt.
Foot side air bag
Slightly lower the sole massage section so that the heel is raised
above it, which will weaken the effect of the roller.
Answer

Publicité

Table des Matières
loading

Table des Matières